Acard ACP-2200 Betriebsanleitung PDF herunterladen (Seite 97)

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual

Page 97

29-xx-05 – Incoming Call Connect:

This feature allows either some or all stations which are ring assigned in Mode 01 or 02 to receive the audible

ring signal when a trunk rings at the station. If the audible signal is disabled the station will still be able to answer

a call by lifting the handset only, if they are ring assigned in Mode 01 or 02

0=Ring All 1=Ring first station 2=Ring first two stations

3=Ring first three stations 4=Ring first four stations 5=Ring first 5 stations

6=Ring first 6 stations 7=Ring first 7 stations 8=Ring 8 stations

9=Ring first 9 stations

Example: If there are 12 stations programmed on Form 01-01 and 29-01-05 is set to a value of 5, the first five

stations will ring, but all twelve stations will be able to access the incoming line simply by lifting the handset.

29-xx-06. 1A2 Emulation:

When an extension is connected to a trunk, another extension can make a conference by press the busy trunk

button if 1A2 Emulation is available. The actual operation of this parameter is dependant upon interaction with

Form 78-ST-03, described elsewhere in this manual.

0=No Trunk Access 1=Access Conditional upon 78-STN-03

The 1A2 Emulation status is shown below:

29-xx-06 78-St-03 Status

0 N/A No access

1 0 No access

1 1 access with tone

1 2 access with no tone

Even if 1A2 Emulation status is enabled, the extension can temporarily disable 1A2 emuation by pressing Function

key: [1A2 Emulation Privacy] – (FN:24 for DSS key in Form 07). When the extension sets 1A2 Emulation Privacy

Key, the key LED will light, and other extensions can't enter the call. The extension can press [1A2- Emulation

Privacy] again to cancel 1A2 Emulation Privacy and turn the key LED off.

29-xx-07. CO Delayed Ring Timer to Hunting Group:

This parameter sets the delayed ringing time for an incoming call to the hunt group. If the stations in the Ringing

Line Preference Assignment (mode 01/02) do not answer the incoming call within the timer listed below, the call

will overflow to the pre-assigned hunt group (mode 29-TK-08).

This parameter is operational only when 35-tk-07 (Day Service) or 35-tk-08 (Night Service) is set to 0, 1, 2, or 3.

It does not function when 35-tk-07/08 is set to 4 (Private Line).

0=Overflow Disabled 1 = 8 sec 2 = 16 sec 3 = 24 sec 4 = 32 sec

5 = 40 sec 6 = 48 sec 7 = 56 sec 8 = 64 sec. 9 = 72 sec.

29-xx-08. CO Delayed Ring Overflow Hunting Group:

This parameter sets the pre-assigned overflow Hunt Group for an incoming call. If the stations in the Incoming Ring

Assignment Forms 01 and 02 do not answer the incoming call within the pre-assigned time (form 29-TK-07), the

call will overflow to the pre-assigned hunt group.

0 = Hunt Group 1 1 = Hunt Group 2 2 = Hunt Group 3 3 = Hunt Group 4

4 = Hunt Group 5 5 = Hunt Group 6 6 = Hunt Group 7 7 = Hunt Group 8

8 = Hunt Group 9 9 = Hunt Group 10

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 194 195

Keine Kommentare

Acard ACP-2200 Betriebsanleitung Seite 97