Acard ACP-2200 Betriebsanleitung PDF herunterladen (Seite 81)

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual

Page 81

Form 10 - Single Digit Dialing Assignment :

Form 10 - Single Digit Group 01 Form 10 - Single Digit Group 02

Item 01 02 03 04 05 Item 01 02 03 04 05

Station

Form 10- Single Digit Group 03 Form 10- Single Digit Group 04

Item 01 02 03 04 05 Item 01 02 03 04 05

Station

Form 10- Single Digit Group 05 Form 10- Single Digit Group 06

Item 01 02 03 04 05 Item 01 02 03 04 05

Station

Form 10- Single Digit Group 07 Form 10- Single Digit Group 08

Item 01 02 03 04 05 Item 01 02 03 04 05

Station

General:

This program permits the stations in one or more station groups to call a specific station by dialing one digit only. To

enable station Single Digit Dialing, Form 05-04-07 must be set to 1 = Enabled.

The settings in this Form are also used by DISA Single Digit Dialing (Form 05-11-08 to enable for DISA use).

Description:

Single Digit Intercom.

When single digit dialing is enabled and a group (1-8) selected in Form 41-stn-01 then extensions will be able to dial

the stations in the group selected by dialing the digits 1 to 5. The digit 1 will call the first station in the group, 2 will

dial the second station in the group and so on up to digit 5. The caller can also dial 6 and then dial a full extension

number to call other extensions or dial (0 or 9) to call the operator.

If a particular group has no entries programmed, the stations in the same number station group will not have single

digit dialing and will not have to use the station to station prefix.

Note: Default programming places all stations in Single Digit Group 1.

Single Digit DISA.

When single digit dialing is enabled and a group (1-8) selected in Form 05-11-08 then DISA callers will be able to

dial the stations in the group selected by dialing the digits 1 to 5. The digit 1 will call the first station in the group, 2

will dial the second station in the group and so on up to digit 5. The caller can also dial 6 and then dial a full

extension number to call other extensions or dial (0 or 9) to call the operator.

If a position is left programmed to 0 then station numbers starting with the digit, which corresponds, to this position

can be dialed in full.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 194 195

Keine Kommentare

Acard ACP-2200 Betriebsanleitung Seite 81