Acard ACP-2200 Betriebsanleitung PDF herunterladen (Seite 175)

TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual

Page 175

To forward calls when you don’t answer or are busy:

Press PGM.

Enter CFD

Dial the extension number where you want to forward your calls.

Enter 3 for No Answer / Busy Conditions.

Dial the extension number where you want to forward your calls.

Your telephone will return to idle. Your telephone is now forwarded. All calls to your station number will now ring at

the forwarding location, if you do not answer your telephone or your telephone is busy.

Note: Prior to software version G1-a10e, stations were unable to forward to hunt groups in systems using 3 or 4

digit numbering plans.

Note: Prior to software version G1-a10e, stations were unable to forward to ACP phones.

Call Forward All stations (Operator Function)

G1-a10e

In some instances, an operator may need to program all stations into Call forwarding. This can be achieved as

follows:

1. From the operator station, press [PRG]

2. Press Call Fwd (FN:53).

3. Enter 00 (2 digit numbering plan) or 000 (3 digit numbering plan) or 0000 (4 digit numbering plan).

4. Enter forwarding type (1=All, 2 = Busy, 3 = Busy/No Answer)

5. Enter forwarding location extension number or hunt group pilot number.

Clear All Call Forwarding (Operator Function)

G1-a10e

To clear all call forwarding on the system:

1. From the operator station, press [PRG]

2. Press Call Fwd (FN:53).

3. Enter 00 (2 digit numbering plan) or 000 (3 digit numbering plan) or 0000 (4 digit numbering plan).

4. Press 4.

Note: This will not remove information programmed in Forms 46-st-07 and 78-st-04.

Call Hold

You can place outside callers and internal (intercom) calls on hold.

Press HOLD.

The caller is on hold.

To pick up an outside line call on Hold.

Lift the handset or press SPKR.

Press the Flashing CO line key

Dial 80 plus the line number (1-4).

Calling the Doorphone

If your system is equipped with a doorphone, this is how you will call it.

Lift the handset or press SPKR.

Dial 88 to speak to the Doorphone.

(If the doorphone is programmed with a Relay, you may activate it

by dialing 0 while connected to the doorphone).

Call Pickup

You can use call pickup to answer calls that are ringing at other telephones. There are a variety of types that you

may choose.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 194 195

Kommentare zu diesen Handbüchern

Keine Kommentare

Acard ACP-2200 Betriebsanleitung Seite 175

Kommentare zu diesen Handbüchern