Acard ACP-2200 Betriebsanleitung PDF herunterladen (Seite 61)

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual

Page 61

Form 05-09 - System Parameters Form - Misc.

G1-a10ax

Form 05-09-T 01 02 03 04 05 06 07 08

ITem

Range of Entries 0 0 - 1 0-9 0 0 0 0 0

Default 0 1 0 0 0 0 0 0

05-09-01 Reserved:

05-09-02 – Console Automatic Queuing:

This feature enables the busy console(s) to have an intercom call(s) queued to it(them). If the station

dials the operator (by 0 or 9) and all the consoles are busy, the system will put this call in the queue to

wait for the operators to be free. The calling station will hear ring back tone instead of busy tone and

the first operator in the group will receive the Busy Remind Signal. The first operator to go on-hook will

receive the call.

0=Disable 1=Enable

05-09-03 - CO Loop Disconnect (Calling Party Control):

This option enables Calling Party Control so that held calls that are abandoned are dropped by the

system and callers who abandon while listening to voice mail do not continue processing. Calling

Party Control is sent from the telco Central Office as an open loop (loop current dropped). Open loop

interval is listed below in milliseconds

0=Disabled 1=80 ms 2=160 ms 3=240 ms 4=320 ms

5=400 ms 6=480 ms 7=560 ms 8=640 ms 9=720 ms

05-09-04 - DISA Busy Tone Detection:

This feature allows the system to recognize busy tone from the CO line during DISA operation for

clearing down the call.

Type 1 = busy tone is 250 ms. on, 250 ms. off.

Type 2 = 500 ms. on and 500 ms. off.

Type 3 = Continuous busy tone (>3.2 seconds).

Type 4 = 375 ms. on and 375 ms. Off.

0 = Disable 1 = Type 1 2 = Type 2 3 = Type 1 and 2 4 = Type 3

5 = Type 1 and 3 6 = Type 2 and 3 7 = Type 1, 2, 3 8 = Type 4

05-09-05 Reserved:

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 194 195

Keine Kommentare

Acard ACP-2200 Betriebsanleitung Seite 61