Acard PCI-to-IDE ATA-133 Bedienungsanleitung PDF herunterladen (Seite 9)

Page 9

7. Configure another RAID set or press ESC to reboot.

8. Continue with FDISK and FORMAT steps as if you are installing

a conventional hard drive.

RAID 1 (Mirror)

For Manual Setup

For New/Blank Hard Drives

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. At the next screen press F2 to from a RAID set.

3. Press F2 to create RAID 1. In a Mirror set the source drive needs

to be equal to or smaller than the destination drive. For optimal

performance the source drive and destination drive should be on

separate IDE channels.

4. Answer N to Auto Setup.

5. Assign Source drive, then assign Destination drive.

6. Assign N when asked to Copy from Source to Destination.

7. Answer Y to Enable Auto-Rebuild.

8. When asked Are you Sure?, press Y to accept.

9. Press ESC to exit the RAID BIOS and boot the computer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Keine Kommentare

Acard PCI-to-IDE ATA-133 Bedienungsanleitung Seite 9