Acard PCI-to-IDE ATA-133 Bedienungsanleitung Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 22
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
Page 13
14. Answer N to decline Offline Copy.
15. Answer Y to enable Auto-rebuild.
16. When asked Are You Sure?, Press Y to accept.
17. Press ESC to exit the RAID BIOS and reboot the computer.
RAID 0+1 (Mirror+Striping)
This RAID array to be used on New/Blank hard drives only, striping
destroys existing data on the hard drive. RAID 0+1 requires four hard
drives.
For Manual Setup
1. As the BIOS boots press F3 when prompted to enter the RAID
BIOS.
2. At the next screen press F2 to from a RAID set.
3. Press F3 to create RAID 0+1.
4. Choose the chunk size by pressing the appropriate number key(64
is recommended).
5. Enter the first Source drive, then enter the second source drive.
Note: To optimize performance, configure both source drives to be
from different channels and configure both destination drives to be
from different channels.
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare