Acard ADR-7608C Bedienungsanleitung Seite 1

User ManualVersion 1.38CH/16CH H.264 Standalone DVRADR-7608C/7616S/7616C

8. Fan System Fan.9. Power Input (from Adapter) Connect the adapter to the DVR for DC power supply. (DC19V / 7A). 10

2.3 HDD Installation1. Use the screwdriver to loosen the four screws on upper casing and rear panel shownas below to lift up the upper casing. 2. Afte

4. Install two SATA HDD to the HDD rack shown as below. Notice the installationdirection. And then fix HDD with screws provided in package.5. Connect

7. Connect the cables back to the CF board shown as below.8. Finally, screw the upper casing back to the case. 13

Section3 Menu3.1 Menu DisplayNO. ICON Description1 TIME System time/ date setup2 RECORD Recording parameters setup3 SCHEDULE Weekly recording schedule

3.2 Menu Tree1.TIME 1.1 DATE SETUP1.2 TIME SETUP1.3 DATA DISPLAY FORMAT1.4 TIME DISPLAY FORMAT1.5 TIME ZONE SETUP1.6 DAYLIGHT SAVING2.RECORD2.1 RESOLU

7.1.4 SYSTEM INFO7.1.5 EVENT LOG7.1.6 FIRMWARE UPDATE7.1.7 SETTING IMPORT/ EXPORT7.1.8 USER MANAGEMENT7.1.9 PERERCORD7.1.10 DVR NUMBER7.2 DISPLAY 7.2.

Section4 Menu Setup For the first time using your DVR, you will want to establish the initial settings. Thisincludes setting items

4.1 TIMETo access time setup, press ENTER button after moving highlight icon to TIME ICON inMenu. Time setup menu will appear on monitor shown as belo

3) DATE DISPLAY FORMAT: YY/MM/DD, MM/DD/YY, DD/MM/YYMove Highlight icon to Date Display Format in the Time setup menu by using UP or DOWNbutton. Date

4.2 RECORDTo access record setup, press ENTER button after moving highlight icon to RECORDICON in Menu. Record setup menu will appear on monitor. 1) R

Record Mode Icon DescriptionMANUALIf MANUAL mode is set, the channel would start recordingonly by pressing the REC/STOP button on front panel.ALWAYSI

4.3 SCHEDULETo access schedule setup, press ENTER button after moving highlight icon toSCHEDULE ICON in Menu. Schedule setup menu will appear on monit

4.4 MOTIONTo access motion setup, press ENTER button after moving highlight icon to MOTIONICON in MENU. Motion setup menu will appear on monitor. 1) M

4.5 ALARMTo access alarm setup, press ENTER button after moving highlight icon to ALARM ICONin MENU. Alarm setup menu will appear on monitor. 4.5.1 AL

4.5.3 ALARM OUTPUT 2The “Alarm Output” can be set to ON or OFF. When it is ON, once the “Alarm in” istriggered, it will activate the “Alarm out” in re

4.5.5 EMAIL NOTIFICATIONEmail notification; which can be set to ON or OFF. When it is ON, the network willadd an “Email Setting” option for user makin

4.6 NETWORKTo access network setup, press ENTER button after moving highlight icon to NETWORKICON in MENU. Network setup menu will appear on monitor.

6) NETWORK:When the NETWORK setting is ON, the Network function will be activated. When thesetting is OFF, the Network function will be terminated.7)

or with the mouse. After inputing the right username and password, press SAVE & ESC tosave it.9) EMAIL SETTINGMove Highlight icon to Email Setting

StatementThe information of the product in this manual is subject to change without prior notice anddoes not represent a commitment on the part of ven

10) STREAMING VIDEO RESOLUTIONIf the “Streaming Video Resolution” is set as CIF, the remote Web Browser will beshowedat CIF resolution. On the other h

4.7 ADVANCEDTo access advanced setup, press ENTER button after moving highlight icon toADVANCED ICON in MENU. Advanced setup menu will appear on monit

button. disk overwrite function can be set as on or off after pressing ENTER button. UseUP or DOWN and ENTER to turn on or off the disk overwrite func

4.7.2 DISPLAYMove Highlight icon to Display in the Advanced setup menu by using UP or DOWN button.Display setup menu will appear after pressing ENTER

4.7.3 CAMERAMove Highlight icon to Camera in the Advanced setup menu by using UP or DOWNbutton. Camera setup menu will appear after pressing ENTER but

1) PTZ PROTOCOL: PELCO-P, PELCO-DIf the channel corresponds to a PTZ camera, setting the correct protocol allows control ofthe PTZ camera.2) PTZ BAUDR

4.7.4 DISK FORMATMove Highlight icon to Disk format in the Advanced setup menu by using UP or DOWNbutton. Disk format menu will appear after pressing

4.7.5 SEARCH & BACKUPSearch & backup function here is used to search the history video data in DVR storage forplayback or backup to other back

4) BY EVENT: Provides a list of event recordings for user select to playback or backup. User can useMARK function to select more than one file to back

6) SNAPSHOT BACKUP:Use “UP/DOWN” moving to the SNAPSHOT Backup option; press Mark button. Select thephotos to be backed up and press Backup button to

Table of ContentsSection1 Introduction...

4.7.6 ACCOUNT/ PASSWORDNOTE: This item would be shown on menu only when AdminLock is set as ON andcan only be accessed by Administrator and authorized

Section5 Live Display 1) Display ModeDisplay modes, full picture, QUAD, 8split, 9-split, 16split are supported. can be pressed for changing the displa

2) OSD BUTTONS for mouse inputMove the mouse cursor to the down side of monitor, the tool-bar would show up as below.Button DescriptionClick on this

the audio sign will display on correspondingvideo channel only.Click on this button with the mouse cursor to takepictures of the current screen.When m

Section6 BackupThe DVR supports USB 2.0 drive and DVD-RW(option) for video file backup, and pleaserefer to 4.7.5 SEARCH & BACKUP for the backup pr

Section8 F/W UpdateStep 1. Please copy the Firmware file to the root directory of the CF card or USB drive,and then insert the CF card or USB drive in

Section9 Remote Monitoring and Control via EthernetThe ADR-7608C/7616S/7616C DVR server can be remotely monitored or controlled viathe IE or Firefox b

Step2. Enter your username and password. The default username and password areAdmin and 111111 respectively. Click on the Login button to enter the m

3) RecordPress RECORD to make record-relevant setting, as graphically demonstrated in thepicture below:After the setting is comple

5) MotionPress MOTION to make scheduled-record-relevant setting, as graphically demonstrated inthe picture below:After the setting is complete, press

Section1 Introduction1.1 Product OverviewDesigned for globally increasing surveillance requirements, 7608C/7616S/7616C is a highperformance 8/16ch sta

7) NetworkPress NETWORK to make network-relevant setting, as graphically demonstrated in thepicture below:After setting is complete, press SAVE

Upgrade the network firmware:Press Firmware Update and system will jump to the following page automatically:Follow the following steps to upgrade the

After recording is stopped, system will prompt that the firmware uploading is successful; asshown in the following picture. Press OK to confirm it.Ste

Step5. After the prompt window of successfully burnt of firmware appears and “OK” ispressed, the firmware-updating procedure is complete;

partition mode making live monitoring.10) PTZ controlClick on the PTZ-control button at the top of the main page and a window displaying thesettings f

9.2 Web troubleshootingQ1: After launching the browser and entering the DVR IP: port, the error "The page cannotbe displayed" appears as sho

APPENDIX 1. Alarm Input/Output Pin Descriptions (16CH)Pin NO. Pin Description1 RS485-2 RS485+3 COM14 Relay Output N.O15 Relay Output N.C16 COM27 Rela

Pin NO. Pin Description21 Sensor Input 922 Sensor Input1023 GND24 Sensor Input1125 Sensor Input1226 GND27 Sensor Input1328 Sensor Input1429 GND30 Sens

APPENDIX 2. CF card Compatible ListBrand Capacity SpeedA-DATA 4GB 266X8GB SpeedyApacer 4GB 300XHagiwara 4GB 300XKingston 1GB N/A4GB 266XPertec 16GB 23

APPENDIX 3. Play process after backing up DVR files to USBdevice(I)Formatting in advance :Reminder: if you wish to backup previous recorded historic d

FPS 120fps(D1), 240fps(Half-D1), 480fps(CIF) Mode Manual, Schedule, Alarm, Motion, Event,AlwaysPlayback FPS120fps(D1), 240fps(Half-D1), 480fps(CIF)

(II) When the formatting is complete, backup the recorded historic data :(1) Insert the USB device into the USB Port in front of the DVR.(2) Enter Men

(5) Then, using the "By channel & Time" backup method as an example: select the“channel/start time/end time” you wish to backup, the bac

(ⅢⅢⅢⅢ) When the backup is complete, files should exist in the USB device:(1) When the backup is complete, which files should exist?1. DVRPlayer.exe =&

Section2 System Appearance & Installation 2.1 Front Panel1. Channel Selection buttons Number buttons can be used to display given channel on monit

h) SEARCH This button can be used to enter playback sub-menu for searching out properrecorded file for playback. i) FUNCThis button is reserved for fu

2.2 Rear Panel1. 8/16CH Video Inputs8/16 channel composite video inputs with BNC connectors. NOTE:NTSC and PAL videosources for 8/16CH video inputs ca